SmokePatch17 Stadiums Pack R7
* compatible with all smokepatch 2017 versions.
Released (2.may.2020)
Note:
recopy the edit file of the patch after copying these stadiums so you will find the stadiums assigned to the correct teams by default.
smoke patch stadiums are no longer included in the patch by default, the stadiums are available as a separate optional add-on, these are default smokepatch stadium packs.
Available Stadiums:
Camp Nou (std002)
Ramon Sanchez Pizjuan (std003)
Anfield - std004)
Wembley Stadium (std005
Stadio Olimpico (std006)
Old Trafford (std007)
Estádio da Luz (std008)
Stamford Bridge (std009)
Parc des Princes (std010)
Allianz Arena (std011)
Etihad Stadium (std012)
Metropole Arena (std013)
Estádio do Morumbi (std014)
Emirates Stadium (std015)
Volkswagen Arena (std017)
Weserstadion (std018)
Santiago Bernabéu (std020)
Stadio San Paolo (std021)
Allianz Stadium (std022)
Saitama Stadium 2002 (std023)
Estádio do Maracanã (std024)
El Monumental (std027)
La Bombonera (std028)
KONAMI Stadium (std029)
San Siro/Giuseppe Meazza (std030)
Türk Telekom Arena (std033)
Cairo International Stadium (std034)
Wanda Metropolitano (std035)
Olympiastadion Berlin (std038)
National Stadium Warsaw (std039)
Stade Louis II (std041)
Amsterdam ArenA (std042)
Orange Vélodrome (std043)
Estádio do Dragão (std044)
Stade de France (std045)
St. Jakob-Park (std049)
Signal Iduna Park (std051)
Ülker Stadyumu (std055)
Estádio José Alvalade (std056)
Camp de Mestalla (std061)
---------------------------------------------------
Release 7
- compatible with all SP17 versions
- extract and replace (04_smkdb_std.cpk) in the download folder of the game
- extract and replace (04_smkdb_std.cpk) in the download folder of the game
+ Download Links
With custom SP shaders (recommended)
* included in smokepatch v4
------------------
THANK YOUUUUU!!!!!!
ReplyDeleteHow can I add cpk files, if the dpfile generator limit is 32 cpks?
ReplyDelete24/5/19 6:27 AM
There is tutorial here to merge cpk and relace smoke extra cpk
DeleteI love this site my game is complete with full patch
ReplyDeleteThank you so much friends!
ReplyDeletenice dude, can u add some pes 2019 another stadium like efootball pro league stadium etc? thank you very much
ReplyDeleteSe puede seguir utilizando el sider?xq son muchos mas estadios
ReplyDeleteNo problem use along with sider stadiums
DeleteThank you!
ReplyDelete
ReplyDeleteAllianz Arena Stadium presents error ... thank you very much ... GREAT WORK
fixed in patch update
DeleteWhat problem do you face??
Deletehow to install this? where should i put the file? is there any renaming need to be done? because i cant find file with same name as the downloaded file. (already on 17.1.2 patch)
ReplyDeleteextract and replace (04_smkdb_std.cpk)
Deletejust replace it inside download folder of the game as mentioned
Vodafone Park please
ReplyDeleteWhite Heart Lane please
ReplyDeleteWill This Work With Sider Stadiums ??
ReplyDeleteYes, stadium server works better with stadium pack installed
DeleteFirst of all, thanks for such a great work! Lots of love from India!
ReplyDeleteSecondly, in Allianz Arena, the tunnel is of Man Utd's one
pack stadiums R6 with a smoke patch 17 V2 errors will not be?
ReplyDeleteNo problem
Deletehi smoke patch team:
ReplyDeleteplease tell the reason of why one of the best pes patch maker teams do not include any turf in the smoke patch game?
thank you for your support of pes2017
Hello
DeleteWe have a customised turf and shaders in the stadium pack, but this is very dependent on the taste of the users, and starting pes18 Konami is making nice turfs so we focus on other things
Hi Smoke patch team, really appreciate this stadium pack;
ReplyDeleteI have a problem with stadium pack. The lightning in some stadium especially in Day time is kinda oberblown. Great when normal gameplay, but in replay player have really bright skin and weird shadow too. Shadow seem blocky and out of place. Play this at medium setting, and have same result in high. Without stadium pack, the lightning is normal.
Any idea?
It also happened to me. But the bugs found with and without stadium pack. Hopefully there is a solution. Anyway, the new facepacks are awesome.
DeleteFor me R7 (smoke shader) fixed this issue. You should try it.
DeleteThank you so Much.You are the onle best.Please is it possible for Africans Nationals Teams for the National Hymns Please..
ReplyDeleteYes please. Kenyan national anthem
Deletedear team smoke, what is the difference between With SmokePatch custom shaders (recommended)and with game default shaders (lower quality)?
ReplyDelete
ReplyDeleteYou are doing very well Thank you Smokepatch team
Thanks for support our PES17, Bro. I have Stadium R5 repack. What different whith this Release 7?
ReplyDeleteEvery version have small enhancement, between 5 and 7: files are more optimised for faster FPS, and some correction like Allianz arena
Deletegreat job guys. . . i love this
ReplyDeleteThank you so Much
ReplyDeleteThank you guys, nice r7 stadiums. However from the tunnel walking to the pitch, players bang on entrance wall. Maybe u could adjust the size of the entrance. But all in all are beautiful stadiums.
ReplyDeletePlease can anybody help me with following problem... I have installed latest patch 20.2.3., and then I installed this Stadium Pack R7, copied and replaced .cpk file, and recopied edit file of the patch to get stadiums assigned to teams, but then problem starts, when I launch game it get to the black screen and then game crashes.... Any thoughts to fix this problem? Any help would be apprecieted. Thanks :)
ReplyDeletei understand what you did,
Deletesmokepatch 20.2.3 is for pes20
stadiums r7 is for pes pes17
Please can you update scoreboard pes17. You guys are doing a great job. Thanks
ReplyDeleteIs it possible to release a Home Ground unlocker for this stadium pack version? The in-game Edit mode is not allowing to change the home graoun for some teams.
ReplyDeleteThat’s because they are assigned
DeleteThere is a work around that:
Use default stadiums (no stadium pack) then assign any stadium to the team you want to change, then save and exit, then install stadiums R7 and run game
what are shaders? and thank you for your good work.
ReplyDeleteLighting, shadows, illuminations, grass contrast...
Deletepls fix emirates stadium, old trafford, etihad stadium
ReplyDeleteTry without stadium server
DeleteOr deactivate these stadiums from server (see sider release for deactivating)
Hi, can you reduce the cpk numbers in your default patch. The SM Extras are taking too many cpks and I want to install other mods but the default cpks are just way too many for no reason at all... I don't even understand why. Do they have any use in the game?
ReplyDeletehello, all the patch cpk files should be the there, removing them or generating the dpfilelist is at your own risk
Deletesee (add cpk tutorial) above menu for how to add mods to smokepatch
hello i like to know how i find the right Stadium ID with your patch SP17.2.2 because i have more stadiums for other clubs you dont have to add but and i dont know the right ID for add on txt file.
ReplyDeleteThanks
hello, see reference/database above menu.
Deleteplease there is an error when extracting stadium pack R7.its says the volume is corrupt and the file is corrupt
ReplyDeletebe sure all parts are downloaded without interruptions to avoid incomplete download
Delete
ReplyDeleteI get all the stadiums with the purple sky how do I fix it?
get the stadiums with smokepatch shaders if you have issues with graohics.
Deletehey smoke, which version has better performance? default shaders (lower quality)or custom shaders?
ReplyDeleteDefault: standard shaders, fast loading, minimum resources needed, might cause low quality graphics in the game.
DeleteSp shaders: high quality, fast loading too, needs little more resources, best compatibility with smokepatch new versions.
thank you smoke :)
DeleteWhen I reach the final of the champions league or the europa league, the match does not load. I have tried all the stadium packs, and I still have the same problem;
ReplyDeleteSmoke team, your patches are the best patches i have ever used. I don't have any complains, it works perfectly good. But one problem is that the stadium in mine game is Santiago bernabeu instead of being Emirates. So can you suggest any ways to fix or that because i have done something wrong.
ReplyDeleteI installed R7 but it caused lagging in the game; how can I restore to default stadiums?. Thanks.
ReplyDeleteTottenham Stadium and Estádio do Maracanã are not working ; it stucks loading
ReplyDeleteFor me too.
DeleteEstádio do Maracanã works in exibition match, but not in cup mode for ex.
Thanks bro.. but chelsea stadium default are disabled, same as on master league, just using Konami Stadium on every team and every game? how to fix it?
ReplyDeletethank u for ur hard work but the stadiums doesnt show in edit
ReplyDeleteHi Smoke team!
DeleteThanks for all, I ask some of my friends to visit your site and they did.
I do have a problem pls, I realized Camp Nou was assigned to PSG.
Secondly, the edit mode shows only a few stadia(only about 4-5).
Guess it could be because I pasted the smoke patch edit file into the download instead of copying it into the download folder by not replacing any file but adding to the copy already there.
hello and welcome
Deletethe patch have the stadiums preinstalled, try reinstall the patch 17.3.2 then copy the stadium pack file again, then start the game, do not change the edit file that the patch will install in the save folder